shirsig 18 Report post Posted January 29, 2017 35 minutes ago, SealHeal said: 1. Some things are not put up for AUC, here's an example Should hopefully work now. It's a bit difficult for recipes because whether an item is auctionable is determined by tooltip entries like "binds when picked up" which may be in recipe tooltips not for the recipe itself but for the item that is created. 37 minutes ago, SealHeal said: 5. you can not write something like the sale on Auc 5 5 0, so that he once defined 5g 5s 0c? You're talking about the price input? It defaults to gold so you could write 5.05 for that. 38 minutes ago, SealHeal said: 4. how to explain addon that I want to set the maximum number of items in the Stack always, not every item separately. So he immediately determines the maximum number of items and offered to put the maximum in the stack, rather than on 1 piece It's not set to 1, it remembers your last used stack size for every item. Also, often it is bad to post the max stack because that results in a high stack-bid-price which pushes it to the bottom of the default AH sorting. 40 minutes ago, SealHeal said: 2. Some things can not see the price, it is pieces of T1, that is, on the Auc and are scanned, but when the fall in the raid, the prices are not visible. 3. I can not see prices epic scrolls BoE Not sure what you mean. 0 Share this post Link to post Share on other sites
SealHeal 0 Report post Posted January 29, 2017 (edited) 11 минуту назад, shirsig сказал: Not sure what you mean. 3. I went to the guild and dropped Cenarion Bracers, but I did not see their rates, even though they were on auctione and I check the scanned blank every day 4. Pattern: Truefaith Vestments It shows the price when I see him with a roll with boss and 1. I can not put a recipe Pattern: Robe of the Archmage through addon, it simply can not see the list of things where I was lecturing 3 screenshots. A standard Blizzard auctioneer laid out properly as paragraphs 6 and 7 with screenshots also added Edited January 29, 2017 by SealHeal 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted January 29, 2017 19 minutes ago, SealHeal said: 1. I can not put a recipe Pattern: Robe of the Archmage through addon, it simply can not see the list of things where I was lecturing 3 screenshots. A standard Blizzard auctioneer laid out properly Like I said, this should be fixed now. 19 minutes ago, SealHeal said: 3. I went to the guild and dropped Cenarion Bracers, but I did not see their rates, even though they were on auctione and I check the scanned blank every day Was the item soulbound or did it have reduced durability? If it was durability it should work now. There's no way to disable the comparison. Enchants not showing is a known issue but I'm not sure how to solve it yet. 23 minutes ago, SealHeal said: 4. Pattern: Truefaith Vestments It shows the price when I see him with a roll with boss I don't understand. Why shouldn't it? 0 Share this post Link to post Share on other sites
friedtoast 0 Report post Posted January 29, 2017 im sorry if this is going to sound "stupid" but i have been trying to figure out for the last 10-15 minutes how to set this up ... all i can seem to find is ""The folder name must be "aux-addon""" ..... do i just make a folder in the addon folder called aux-addon ...... if not where do you make the folder ....... and once the folder is made do you just copy past the text in it or what ??? 0 Share this post Link to post Share on other sites
gambinho 11 Report post Posted January 29, 2017 Hey shirsig, i have this problem with cooldowns that i get numbers in the midscreen very often. i dont now exactly what those numbers are and how i can get rid of them? keep up the good work 0 Share this post Link to post Share on other sites
gambinho 11 Report post Posted January 29, 2017 6 minutes ago, friedtoast said: im sorry if this is going to sound "stupid" but i have been trying to figure out for the last 10-15 minutes how to set this up ... all i can seem to find is ""The folder name must be "aux-addon""" ..... do i just make a folder in the addon folder called aux-addon ...... if not where do you make the folder ....... and once the folder is made do you just copy past the text in it or what ??? just remove the -master in the foldername 0 Share this post Link to post Share on other sites
friedtoast 0 Report post Posted January 29, 2017 Just now, gambinho said: just remove the -master in the foldername so i just click on the left where it says clone or download ? 0 Share this post Link to post Share on other sites
TheDruidCode 28 Report post Posted January 29, 2017 Just now, friedtoast said: so i just click on the left where it says clone or download ? Yes, download. There will be a zip file. Put the content of that in addons folder. Remove -master. 0 Share this post Link to post Share on other sites
SealHeal 0 Report post Posted January 29, 2017 50 минут назад, shirsig сказал: I don't understand. Why shouldn't it? for example there is not specified the price, although this recipe is on the auction, and he stands 10-11g, also with other rare and epic BoE recipes. Just for example I do not see the price of things with BoE and DM or BRD inst 52 минуты назад, shirsig сказал: Was the item soulbound or did it have reduced durability? If it was durability it should work now. No, the thing is BoE, but it is not visible on the price, although it is scanned at the auction 54 минуты назад, shirsig сказал: don't understand. Why shouldn't it? I fell recipe with the boss - I look at him, there is information about the recipe, but the price is not specified, the BoE recipe 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted January 29, 2017 Like I said, the recipe prices should be fixed. About the bracers, they can be soulbound even if they are BoE. Aux will not show prices for anything that's soulbound, regardless if boe or bop. 0 Share this post Link to post Share on other sites
SealHeal 0 Report post Posted January 29, 2017 (edited) 5 минут назад, shirsig сказал: Like I said, the recipe prices should be fixed. About the bracers, they can be soulbound even if they are BoE. Aux will not show prices for anything that's soulbound, regardless if boe or bop. http://db.vanillagaming.org/?item=16830 Cenarion Bracers Binds when equipped but when they fall in the raid, they can not see the price, it is with many things T1, check please Edited January 29, 2017 by SealHeal 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted January 29, 2017 I know they're boe ... that decides when they're bound, not if they are. 0 Share this post Link to post Share on other sites
friedtoast 0 Report post Posted January 29, 2017 so i have it downloaded now ( thanks to the guy who helped) im trying it out and one thing im woundering ... si there a way to set it up to only show items that you can buyout to sell to a vendor for a profit ? 0 Share this post Link to post Share on other sites
gambinho 11 Report post Posted February 2, 2017 On 29.1.2017 at 6:24 PM, gambinho said: Hey shirsig, i have this problem with cooldowns that i get numbers in the midscreen very often. i dont now exactly what those numbers are and how i can get rid of them? keep up the good work anyone? 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted February 2, 2017 4 minutes ago, gambinho said: anyone? Well, disable all other addons, delete savedvariables ... 0 Share this post Link to post Share on other sites
Cruzix 6 Report post Posted February 2, 2017 15 minutes ago, gambinho said: anyone? That is EnemyDebuffTimersVanilla causing the numbers, install DebuffTimers instead. 0 Share this post Link to post Share on other sites
gambinho 11 Report post Posted February 2, 2017 30 minutes ago, Cruzix said: That is EnemyDebuffTimersVanilla causing the numbers, install DebuffTimers instead. problem fixed. tyvm 0 Share this post Link to post Share on other sites
sone3d 0 Report post Posted February 8, 2017 Hi, shirshig! Cool addon! I have downloaded aux_merchant_prices-master.zip I have tried everything but I can't make it work. 1. Where do I exactly place the extracted folder? 2.To what exactly should I rename it? 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted February 8, 2017 (edited) 12 hours ago, sone3d said: Hi, shirshig! Cool addon! I have downloaded aux_merchant_prices-master.zip I have tried everything but I can't make it work. 1. Where do I exactly place the extracted folder? 2.To what exactly should I rename it? You need aux itself too. Then the folder is aux_merchant_prices and installed as if a separate addon. any interest in making a stand alone aimed shot cast bar? none of the current ones work that great and seem to break each other etc also I know you played on nostpvp, are you playing on Ely pvp aswell? Sorry, not much spare time right now. Playing on nost pve and zeth (mostly twinking). Edited February 8, 2017 by shirsig 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted February 9, 2017 (edited) made some changes to the post tab after many requests: stack size is no longer saved for an item, instead automatically set to the highest possible undercutting the stack price is gone and instead the table has a selection again and undercutting is automatically adjusted when the stack size changes (you can still match the stack size by double clicking) by default only buyout prices are listed, to get both listings use /aux post bid and /run ReloadUI() (there may be some bugs if you don't delete the savedvariables) edit: simplified coloring, only red for undercutting unit price in the buyout listing or undercutting stack price in the bid listing. Bid undercutting always undercuts the stack price. Edited February 9, 2017 by shirsig 0 Share this post Link to post Share on other sites
toddforth 0 Report post Posted February 10, 2017 Installed latest build of Aux and it stopped working. When you click to post an auction nothing happens at all. No error, no nothing. Also is there something I have to do to enable the vendor prices to be seen after installing the db? 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted February 10, 2017 (edited) 5 hours ago, toddforth said: Installed latest build of Aux and it stopped working. When you click to post an auction nothing happens at all. No error, no nothing. Also is there something I have to do to enable the vendor prices to be seen after installing the db? 22 hours ago, shirsig said: (there may be some bugs if you don't delete the savedvariables). /aux tooltip vendor sell Edited February 10, 2017 by shirsig 0 Share this post Link to post Share on other sites
maxxee 0 Report post Posted February 10, 2017 Hey, 1. Installed crafty while ago and cant see "reagents: total cost" in craft window like on screenshot https://camo.githubusercontent.com/10376e1238285cbef8e116cf36d0e6279607f32c/687474703a2f2f692e696d6775722e636f6d2f796c437474646b2e706e67 where did it go and how to get it back? 2. Can you make Aux to post items remained items in inventory after posting all stacks of same item i.e. i have 64[cloth] and posting 10x6 stacks and I want Aux to post remained 4 cloths with item price as before. Is that possible? 0 Share this post Link to post Share on other sites
shirsig 18 Report post Posted February 10, 2017 37 minutes ago, maxxee said: Hey, 1. Installed crafty while ago and cant see "reagents: total cost" in craft window like on screenshot https://camo.githubusercontent.com/10376e1238285cbef8e116cf36d0e6279607f32c/687474703a2f2f692e696d6775722e636f6d2f796c437474646b2e706e67 where did it go and how to get it back? 2. Can you make Aux to post items remained items in inventory after posting all stacks of same item i.e. i have 64[cloth] and posting 10x6 stacks and I want Aux to post remained 4 cloths with item price as before. Is that possible? That's a feature of aux, not crafty. With the newest version that's pretty easy, just have to click post a second time. 0 Share this post Link to post Share on other sites
maxxee 0 Report post Posted February 10, 2017 (edited) Using old aux where I dont need to click two times to undercut bid and buyout separately. So if I upgrade aux, I'll solve my two issues from previous post and get new one. thats sad. btw while you are here, I am using auctioneer in pair with aux so I can get some kind of market price of items. Aux have 'historical price', where from it gets it and how to scan AH without auctioneer button? Just press search without any criteria will be enough to fullfill and update database? Edited February 10, 2017 by maxxee 0 Share this post Link to post Share on other sites